| Devices |
What devices are required for carrying out IO2Th/Engler?
A diagnosis device, an oxygen ionizator and an oxygen source (oxygen concentrator or steel cylinder with throttle valve).
Oxygen Ion 3000/by Dr. Engler
The oxygen Ion 3000/by Dr. Engler is a so-called oxygen-ionizator which enables you to enrich medical oxygen with electrical charge carriers in the form of “oxygen-cations” or “oxygen anions”. The administration of enriched oxygen is carried out via an oxygen mask. The oxygen quantity varies between 4 and 8 liters, yet the changed charge quantity has to be considered. The therapeutic session lasts 12 minutes. As an alternative, oxygen concentrators may be used instead of oxygen cylinders.
Because of the state-of-the-art processor technology, the respective polarities are changed over automatically, without having to switch the oxygen supply. A data interface to VND Diagnosis allows an automatic therapeutical transmission from the diagnosis device VNS Diagnosis 3000/by Dr. Engler.
VNS Diagnosis 3000/by Dr. Engler
As an ideal complement to Oxygen Ion 3000/by Dr. Engler, VNS Diagnosis 3000/by Dr. Engler supports your diagnostic procedure. VNS Diagnosis 3000/by Dr. Engler measures the capacity and the resistance between both gold electrodes and forms an optic display of the vegetative situation in the form of a LED-diagram. Of course there is the possibility to read off the measured values as direct numbers as well and can be interpreted individually. Because of similarities to the Oxygen Ion 3000/by Dr. Engler, a display of therapeutical proposals was also integrated. A data wire immediately transmits the therapeutical proposal to Oxygen Ion 3000/by Dr. Engler, from which a further program selection can be started afterwards. The shape of the gilded electrode plates is handy and therefore facilitates the reproductibility of the measured results.
For more information on the manufacturer MSS, please click the link contacts.
|
|
|
Startseite
Forum
Gästebuch
Mitglieder
